Sigh

[yekim_4321]

Hi all, having a few probs setting up tank due to failed promises of bits of kit turning up or not as the case may be, still patience is a virtue(whoever said that should be shot) . Okay so this is what i have so far, Tank, skimmer, circulation pumps, starters for T8 tubes 4 of, sump tank, system 2000 4 port wavemaker, salt UV?. Need to modify the sump a bit but am nervous about moving glass and re-sealing it never done it before.

 

[ste2k3]

its quite simple to move glass. i spend quite a bit of time building/re-sealing tanks. all you need to do is to get a razor (well, a pack of them) and cut away at the silicone and you will probably go through quite a few blades doing this. as long as the main seals along the tank are left alone, then it should be fine. then, get some old blocks of wood as spacers to rest the glass on and silicone the divider back into position. if you want this to look neat, use masking tape and run it parrallel to the seal an this should make it look a bit neater.

ste