Do you think this article is ok for my website?
So What Is 'Cycling A Fish Tank’?
Cycling a fish tank is the term used when the full cycle of Nitrite and Nitrate has progressed. The way of which it works is that fish and waste food produce Ammonia which is very dangerous to your fish, when Ammonia is present, a bacteria named Nitrite forms, which also, is dangerous to your fish. From the presence of Nitrite, Nitrate forms, which is not dangerous to your fish, but kills off any unwanted Ammonia or Nitrite.
Why Should I Cycle My Tank?
Although many people don’t cycle their fish tank, it is critical if you want your fish to live a longer, happier life. Not only can you save your fishes lives from cycling your tank, you can save quite a lot of money as you do not have to buy new fish every week…
How Can I Cycle My Fish Tank?
There are two ways of which you can cycle your fish tank, you can do a fish-in cycle or a fishless cycle. With a fish-in cycle, you should buy some cheap, strong fish like guppies or mollies that would be able to withstand low levels of Nitrite and Ammonia. With a fishless cycle, you should buy a large bottle of Ammonia from a store (Boots/B&Q) or online. Also when cycling a tank, you will need a master water testing kit such as the API brand.
I Want To Do A Fish-in Cycle…
If you want to do a fish-in cycle, you should follow the simple instructions below:
You Will Need:
Master water testing kit
Instructions:
1. Do a 25% water change daily to keep Ammonia and Nitrite levels below 0.25ppm.
2. Test Ammonia Nitrite levels daily (We recommend you to record your results).
3. After approximately a week, Ammonia levels will begin to drop and Nitrite levels will increase.
4. Ammonia should hit 0ppm and Nitrite should have a higher level, continue doing 25% water changes to keep Nitrite levels at a minimum.
5. After a while, Nitrite levels should begin to drop and Nitrate will be visible in tests.
6. When Nitrite and ammonia levels reach and stay at 0ppm for a week, the cycle is complete.
I Want To Do A Fishless Cycle…
If you want to do a fishless cycle, you should follow the simple instructions below:
You Will Need:
Master water testing kit
A bottle of Ammonia
Instructions:
1. Add Ammonia to the tank to raise the level to 4-5ppm. ( use http
/www.fishforums.net/aquarium-calculator.htm to calculate how much you need)
2. Test Ammonia levels daily and continue adding more when it drops to 0ppm (We recommend you to record your results).
3. When the Ammonia levels drop to 0ppm within 24 hours, test for nitrite.
4. Continue raising the Ammonia levels back up to 4-5ppm.
5. Test Nitrite levels daily as they should increase.
8. When Nitrite levels start to drop, test for Nitrate as that should now be visible.
9. When Nitrite reaches 0ppm and Nitrate levels are high, the cycle is complete.
11. Do a 75-90% water change to get rid of any waste.
12. Stop raising the ammonia and house your fish. (If there is a large time gap between stopping adding ammonia and housing your fish, you may need to re-cycle your tank all over again!)
So What Is 'Cycling A Fish Tank’?
Cycling a fish tank is the term used when the full cycle of Nitrite and Nitrate has progressed. The way of which it works is that fish and waste food produce Ammonia which is very dangerous to your fish, when Ammonia is present, a bacteria named Nitrite forms, which also, is dangerous to your fish. From the presence of Nitrite, Nitrate forms, which is not dangerous to your fish, but kills off any unwanted Ammonia or Nitrite.
Why Should I Cycle My Tank?
Although many people don’t cycle their fish tank, it is critical if you want your fish to live a longer, happier life. Not only can you save your fishes lives from cycling your tank, you can save quite a lot of money as you do not have to buy new fish every week…
How Can I Cycle My Fish Tank?
There are two ways of which you can cycle your fish tank, you can do a fish-in cycle or a fishless cycle. With a fish-in cycle, you should buy some cheap, strong fish like guppies or mollies that would be able to withstand low levels of Nitrite and Ammonia. With a fishless cycle, you should buy a large bottle of Ammonia from a store (Boots/B&Q) or online. Also when cycling a tank, you will need a master water testing kit such as the API brand.
I Want To Do A Fish-in Cycle…
If you want to do a fish-in cycle, you should follow the simple instructions below:
You Will Need:
Master water testing kit
Instructions:
1. Do a 25% water change daily to keep Ammonia and Nitrite levels below 0.25ppm.
2. Test Ammonia Nitrite levels daily (We recommend you to record your results).
3. After approximately a week, Ammonia levels will begin to drop and Nitrite levels will increase.
4. Ammonia should hit 0ppm and Nitrite should have a higher level, continue doing 25% water changes to keep Nitrite levels at a minimum.
5. After a while, Nitrite levels should begin to drop and Nitrate will be visible in tests.
6. When Nitrite and ammonia levels reach and stay at 0ppm for a week, the cycle is complete.
I Want To Do A Fishless Cycle…
If you want to do a fishless cycle, you should follow the simple instructions below:
You Will Need:
Master water testing kit
A bottle of Ammonia
Instructions:
1. Add Ammonia to the tank to raise the level to 4-5ppm. ( use http
/www.fishforums.net/aquarium-calculator.htm to calculate how much you need)2. Test Ammonia levels daily and continue adding more when it drops to 0ppm (We recommend you to record your results).
3. When the Ammonia levels drop to 0ppm within 24 hours, test for nitrite.
4. Continue raising the Ammonia levels back up to 4-5ppm.
5. Test Nitrite levels daily as they should increase.
8. When Nitrite levels start to drop, test for Nitrate as that should now be visible.
9. When Nitrite reaches 0ppm and Nitrate levels are high, the cycle is complete.
11. Do a 75-90% water change to get rid of any waste.
12. Stop raising the ammonia and house your fish. (If there is a large time gap between stopping adding ammonia and housing your fish, you may need to re-cycle your tank all over again!)
