johnbullas
New Member
- Joined
- Aug 19, 2009
- Messages
- 1
- Reaction score
- 0
- Points
- 0
Greetings! ...... With my two year old showing an interest in "fishies" I have finally had the chance to get back to fishkeeping!
110kg of water sitting next to the sofa needed some proper toddler proof support so got hold of some 200kg SWL brackets from Screwfix, fitted them to the wall and hid them inside the Juwel plinth, it can't get pulled over now... #1 just need a simple way to get rid of some scale deposit on the back panel
We bought a Juwel Rekord 800 setup off of ebay and it comes with an internal filter with powerhead (right word?) to pump water through the filter media box: This is the powerhead
Now the powerhead is mounted into a plastic adaptor which connects it to the combined plastic divider and water conduit and when the filter is used ( as affixed with silicone) on the right rear of the tank, the spacing allows the powerhead to exit via a hole in the side of the casing
If you want to mount the filter on the left side of the tank the powerhead needs to move to the left to allow space for the head to rotate to pump out to the right
In studying the setup there seems to be an unused locating lug (near my thumb in the photo) on the divider/conduit that suggests you can get a mirror image adaptor to allow the powerhead to blow out of the right hand hole....#2 Anyone ever got one of these from where
Looks like a great forum based on my google seach!
110kg of water sitting next to the sofa needed some proper toddler proof support so got hold of some 200kg SWL brackets from Screwfix, fitted them to the wall and hid them inside the Juwel plinth, it can't get pulled over now... #1 just need a simple way to get rid of some scale deposit on the back panel
We bought a Juwel Rekord 800 setup off of ebay and it comes with an internal filter with powerhead (right word?) to pump water through the filter media box: This is the powerhead
Now the powerhead is mounted into a plastic adaptor which connects it to the combined plastic divider and water conduit and when the filter is used ( as affixed with silicone) on the right rear of the tank, the spacing allows the powerhead to exit via a hole in the side of the casing
If you want to mount the filter on the left side of the tank the powerhead needs to move to the left to allow space for the head to rotate to pump out to the right
In studying the setup there seems to be an unused locating lug (near my thumb in the photo) on the divider/conduit that suggests you can get a mirror image adaptor to allow the powerhead to blow out of the right hand hole....#2 Anyone ever got one of these from where

Looks like a great forum based on my google seach!







