Seisage
Fish Crazy
I have some questions regarding cycling a tank characterized by a lot of tannins and low KH and pH.
Iām working on setting up a biotope tank with these conditions. Iāve read through the fishless cycle guide here on the forums and Iām pretty familiar with the nitrogen cycle as a scientific concept. However, in reading the guide, I see that pH below 7.0 can notably delay the cycling process. Of course, that is at odds with the biotope Iām going for. What would be the best practice for cycling a low pH tank? Should I establish the cycle and then add the wood and leaf litter? Seems counterintuitive and I suspect a change like that would throw things off.
The tank will be planted, but not extremely heavily. Iāll only have floaters (frogbit and water lettuce) and while theyāre fast-growing, thereās only so much volume they can attain before running out of surface area. So, while I could try a silent cycle, Iām not sure Iād have enough plant biomass for it. Plus, itād be great if I could add a full tetra school at once instead of having to wait a week or two between additions of 3 fish at a time.
Would a combo of the fishless/silent methods work out? Maybe follow the fishless method, but dose lower ammonia as to not damage the plants?
Other relevant information:
-Tap water pH: 7.2
-Tank pH with tannins is unknown (holiday traveling has halted tank setup). Probably shooting for somewhere between 6.5-6.8. Exact GH and KH currently unknown for same reason, but hardness in my area is around 20ppm
-I do have an established 5.5gal I just adopted from someone. I could transfer some of the substrate to seed the new tank, but I donāt have a ton to work with, plus itās got a lot of detritus and detritus worms (maybe thatās a good thing?) Canāt transfer filter media. Itās one of those cheap little internal filters with replaceable filter cartridges. Maybe I could replace the cartridge and put the old one in the new tank?
Iām working on setting up a biotope tank with these conditions. Iāve read through the fishless cycle guide here on the forums and Iām pretty familiar with the nitrogen cycle as a scientific concept. However, in reading the guide, I see that pH below 7.0 can notably delay the cycling process. Of course, that is at odds with the biotope Iām going for. What would be the best practice for cycling a low pH tank? Should I establish the cycle and then add the wood and leaf litter? Seems counterintuitive and I suspect a change like that would throw things off.
The tank will be planted, but not extremely heavily. Iāll only have floaters (frogbit and water lettuce) and while theyāre fast-growing, thereās only so much volume they can attain before running out of surface area. So, while I could try a silent cycle, Iām not sure Iād have enough plant biomass for it. Plus, itād be great if I could add a full tetra school at once instead of having to wait a week or two between additions of 3 fish at a time.
Would a combo of the fishless/silent methods work out? Maybe follow the fishless method, but dose lower ammonia as to not damage the plants?
Other relevant information:
-Tap water pH: 7.2
-Tank pH with tannins is unknown (holiday traveling has halted tank setup). Probably shooting for somewhere between 6.5-6.8. Exact GH and KH currently unknown for same reason, but hardness in my area is around 20ppm
-I do have an established 5.5gal I just adopted from someone. I could transfer some of the substrate to seed the new tank, but I donāt have a ton to work with, plus itās got a lot of detritus and detritus worms (maybe thatās a good thing?) Canāt transfer filter media. Itās one of those cheap little internal filters with replaceable filter cartridges. Maybe I could replace the cartridge and put the old one in the new tank?