Raising and Lowering pH
One can raise or lower pH by adding chemicals. Because of buffering, however, the process is difficult to get right. Increasing or decreasing the pH (in a stable way) actually involves changing the KH. The most common approach is to add a buffer (in the previous section) whose equilibrium holds the pH at the desired value.
Muriatic (hydrochloric) acid can be used to reduce pH. Note that the exact quantity needed depends on the water's buffering capacity. In effect, you add enough acid to use up all the buffering capacity. Once this has been done, decreasing the pH is easy. However, it should be noted that the resultant lower-pH water has much less KH buffering than it did before, making it more susceptible to pH swings when (for instance) nitrate levels rise. Warning: It goes without saying that acids are VERY dangerous! Do not use this approach unless you know what you are doing, and you should treat the water BEFORE adding it to the aquarium.
Products such as ``pH-Down'' are often based on a phosphoric acid buffer. Phosphoric acid tends to keep the pH at roughly 6.5, depending on how much you use. Unfortunately, use of phosphoric acid has the BIG side effect of raising the phosphate level in your tank, stimulating algae growth. It is difficult to control algae growth in a tank with elevated phosphate levels. The only advantage over hydrochloric acid is that pH will be somewhat better buffered at its lower value.
One safe way to lower pH WITHOUT adjusting KH is to bubble CO2 (carbon dioxide) through the tank. The CO2 dissolves in water, and some of it forms carbonic acid. The formation of acid lowers the pH. Of course, in order for this approach to be practical, a steady source of CO2 bubbles (e.g. a CO2 tank) is needed to hold the pH in place. As soon as the CO2 is gone, the pH bounces back to its previous value. The high cost of a CO2 injection system precludes its use as a pH lowering technique in most aquariums (though see the PLANT FAQ for inexpensive do-it-yourself alternatives). CO2 injection systems are highly popular in heavily-planted tanks, because the additional CO2 stimulates plant growth.
