Building Tank Stand/table?

[xweeqtx]

So, my new tank needs something to hold it. It's 2ft x 1.5ft - but how do I do it? I'd rather have my own built that buy a TV stand or something, as I'd need it higher up than that because of my young son. Small hands PULL at things!!

 

[dthoffsett]

Here's a good article on building a stand.

http/www.fishforums.net/index.php?showtopic=110738

And here's are great place to post questions on DIY stuff.
http/www.fishforums.net/index.php?showforum=9

 

[Behold]

So, my new tank needs something to hold it. It's 2ft x 1.5ft - but how do I do it? I'd rather have my own built that buy a TV stand or something, as I'd need it higher up than that because of my young son. Small hands PULL at things!!

I built my own with no plans from the internet.

you have a small tank so strength will not be an issue. Just remember to puzzle connect your joints and that the main load is on the down sections.

I made my tank 75cm of the ground so its not low.... cost me 40 quid in wood and i made it with 44mmx44mm thick wood for the main frame and then used thiner panels on the outside.

Its not fully finished. i have done a hood surround too. Its not amazing but for my first attempt it works well

remember to make sure the top is flat or you will need to use an MDF base to take out any impurities. then polysteryne base before the tank goes on.