It was fixed i notixed the catfish came out around 6pm they never ever come out they was going pretty mad i then noticed it stuck to the back glass for hours the catfish was swiming up and down with the light on they normaly dont swim or come out with the light out i just had a look and its gone...
So i have just 2 talking cat fish in 1 tank i noticed the water was getting low so filled it up with a empty external filter the sand all moved around so could of came out of the sand ?
It looks like a shrimp ?? Or somthing ??
Here is 1 of my catfish
Because if i get it drilled 50mm then they would deliver the glass ( 6ft ) and then if it was two small i would need to send it back off to get drilled again.
I have been told by the shop who im buying the glass off that they can drill any hole up to 50mm for free so the shop im buying the...
So i have a 6ft tank which has a built in overflow in the center of the tank and has 2 drilled holes in the bottom of the overflow which i have messered has 55mm each. The holes was drilled by the makers of the tank.So i went out and bought a 50mm bulkhead and was told i need a 65mm hole in my...
Just a quick update i have repaired the tank and have left the silcone dry for 48 hours now im filling it up to see if it will leak. The plan is to fill it right up and leave it for a week to see if it leaks.I have put silcone over the crack and then a plane of glass over the crack and then put...
Take a look at this video
http://www.youtube.com/watch?v=1wmegsJjk2s
I don't think my tank is worse than that.
If you have not got time to look at the video here is a pic
I found this on youtube the center brace broke and the front of the tank cracked and leaked.The tank has been...
I put the tank form the stand onto the floor and put bricks under it. I then filled the tank up all the way and then put a bucket under the crack to catch the water. I had 2 drops come from the crack in 24 hours there was 2 drops in the bucket. I have tryied to repair it now have to wait 3 days...
So just a quick update i got a friend who works for auto glass ( repairs car windows ) and he has looked at the tank and have said that the glass has twisted and not cracked.We have filled the tank up and there is a little drop comming from a little crack here is a photo i have highlighted it...
You will ether need to get rid of the whole tank and buy a nw one or replace the bottom bit of glass. I have had the same thing happen to me a few days ago.
You can find my thread here with some answers
http://www.fishforums.net/index.php?/topic/427324-cracked-fish-tank/
Could i ask instead of replacing the whole bottom sheet couldn't you put a strip over the crack ?
If i replaced the whole bottom sheet i would need to drill holes for the overflow and stuff.
So i have been having problems with undoing my bulkheads for a while now i done them up hand tight and then clicked on that i put them on wrong ( the nut was in side ) So i have been trying to undo the nuts for months now with no luck so i thought id saw the nut off which worked both bulkheads...
So i think i have installed my bulkheads the wrong way i have the nut on the inside of the tank and then the black seal unde the nut on the inside and then the white seal on the out side of the tank. The black seal in side is bigger than the white seal. Im guessign the nut and black seal needs...