The April FOTM Contest Poll is open!
🏆 Click to vote! 🏆
Hi, sorry can't see anything attached. Usually after 2-3 bubbles per second, but depends..Hi all so I set up my new co2 tank and my bubbles per second is like attached.. is this good? Its a 200L tank.. the co2 indicator is still dark green but i open the regulator and bubbles still have the same bps..
What's your setup? What co2 tank, regulator and diffuser do you have?I have opened the valve all the way and its still not 3 bubbles per second.. could it be because I put normal water in the bubble count container?
JBL pro flora M502 with an inline diffuserWhat's your setup? What co2 tank, regulator and diffuser do you have?
What pressure(s) does your regulator show?I have opened the valve all the way and its still not 3 bubbles per second.. could it be because I put normal water in the bubble count container?
What pressure(s) does your regulator show?
No idea how.. bubbles are there but it just doesn't increase if fully openNot familiar with the reg, can you bypass the solenoid and rule out whether theres an issue with that?
This is connected to a timer so it goes off when the timer is up. When that happens and its turned off the bubbles do stop so wouldnt that prove its not stuck?It sounds like your solenoid is stuck if you unplug the solenoid do you still get bubbles?
Yep definitely if your getting bubbles when the solenoid is off it means it’s stuck. Quite a dangerous situation for the fish and you I would recommend closing the tap on your canister ASAP and remove the regulator once the canister is fully off and your dials drop to 0.This is connected to a timer so it goes off when the timer is up. When that happens and its turned off the bubbles do stop so wouldnt that prove its not stuck?