Building Acrylic Tank

FishForums.net Pet of the Month
🐶 POTM Poll is Open! 🦎 Click here to Vote! 🐰

jpmcca01

New Member
Joined
Aug 13, 2003
Messages
23
Reaction score
0
Location
Louisville, KY
I have desided to make an acrylic tank for under $150. The dimensions will be 48in x 24in x 24in. About 100+ gal.
Only problem is I am not sure what thickness of acrylic should be used for this project, and what is a good bonding chemical that wont hurt fish later on?
Also should I use corner pieces or just bond the edges together?

I was thinking of using a .23in thick acrylic. I know acrylic is strong, but I dont want it to bow at all when full of water.

If any has ever done a project like this please share some information with me. ;) ( Designs, custom filtration, etc... )
Also was thinking of putting a PVC pipe on the side near bottem for doing easier water changes and using a good Biowheel for filtration. ( I use one on my 30gal and works great. )
 
;) Haven't used acrylic myself but This Page has many different sections and should give you lots of info to be going on with. ;) Mac.
 
Hi, sorry I am tuning in a little late, thou this page might help you out Here I found it useful when I was considering building my own tank.

HTH
 

Most reactions

trending

Staff online

Back
Top