Jump to content


Photo

How To Hide Filter Intake Strainer?


  • Please log in to reply
6 replies to this topic

#1 Ilikefishes

Ilikefishes

    New Member

  • Member
  • 44 posts

Posted 06 July 2009 - 11:25 AM

I have recently hooked up a Fluval 304 external filter to my Juwel Vision 180 litre tank. The intake strainer and tubing is pretty ugly and I have seen this clear plastic tube for sale on ebay: http://cgi.ebay.co.u...r...93:1|294:50

Does anyone know if this would be suitable to replace the existing tube, which is a dark grey colour. Also the strainer is a light grey and looks pretty rubbish - anyone know if you can get replacements in clear plastic or different colours? Have thought about putting it behind some rocks or plants to hide it but I would think this would have an impact on it cleaning power?

#2 m00se

m00se

    Fish Crazy

  • Member
  • 259 posts

Posted 06 July 2009 - 12:46 PM

As long as you don't block off the intake physically, the filter will still be fine. A lot of people (myself included) hide the filter intake with plants or rock, and as I say, as long as nothing physically bungs it up you should be ok for filtration power. I have no idea if you can get replacement differently-coloured intake covers/strainers, however, but if you cover it up well then you should be laughing :)

#3 wendywc

wendywc

    Rocking a crabshell for a hat.

  • Member
  • Pip
  • 2,157 posts
  • Gender:Female

Posted 06 July 2009 - 01:29 PM

I would think that the clear tube would start building some algae and get ugly anyway. I put a big piece of driftwood in front of mine.

Edited by wendywc, 06 July 2009 - 01:40 PM.


#4 m00se

m00se

    Fish Crazy

  • Member
  • 259 posts

Posted 06 July 2009 - 01:31 PM

Yes, my EX1200 has clear tubing and you get some serious green buildup in the tubes after a while. Nothing a good pipe brush can't clean out mind you, but still worth bearing in mind. Nice long drift-plank in front of it with some green leafy goodness to make it all seem a bit more natural and you're home free :)

#5 Ilikefishes

Ilikefishes

    New Member

  • Member
  • 44 posts

Posted 06 July 2009 - 02:06 PM

Thanks I think I will hide it with some wood and plants. Another problem is that the tank has Juwel 3d background fitted. The clip that holds the strainer pipe would normally go over the side, with the sucker up against the aquarium glass. Because the background is in the way the clip wont go over properly, and ends up sticking the strainer out at a funny angle. Anyone else had this problem?

#6 mark1979

mark1979

    Fishaholic

  • Member
  • 585 posts

Posted 06 July 2009 - 02:09 PM

my intake strainer is fully visable and its not a small thing (fx5)

you can hide it, but i like mine to be where all the floating craps gets too,and thats now about a 3rd up the glass and nothing in its way.

ive managed to get the flow around the tank so that the crap gets pushed right into the intake. works a treat!!

#7 Cdarmychi

Cdarmychi

    Fish Crazy

  • Member
  • 278 posts

Posted 06 July 2009 - 08:22 PM

I wrapped my filter and all equipment other then the actual heater in java moss, and now Im growing a moss wall to mask it even further. I only have the actual strainer not blocked, but a strategicly placed amazon sword solved that issue.

Good Luck!

Sakura




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users