% Of Toxic Ammonia Charts, On the Ammonia-Ammonium Equilibrium |
![]() |
![]() ![]() |
% Of Toxic Ammonia Charts, On the Ammonia-Ammonium Equilibrium |
Aug 18 2006, 10:21 PM
Post
#1
|
|
![]() Just call me Dr. Honkerface Group: Members Posts: 1331 Joined: 28-June 04 From: Ames, IA Member No.: 7429 |
Since the tests for our aquariums just read the total ammonia content in the water, the question has come up how much of that ammonia is actually toxic? This is a complicated question, which really has to do with the ammonia-ammonium equilibrium, ammonia being toxic, ammonium being comparatively much less toxic. Ammonium is not harmless, there is evidence it interferes with the normal salt exchange at the fish gills, but it is not anywhere as dangerous as ammonia.
Also I'd just like to make it clear that any level of ammonia will cause health problems. Ammonia can cause gill damage, that could become permanent, and a very recent article ("Low levels of environmental ammonia increase susceptibility to disease in Chinook salmon smolts " by Ackerman PA, Wicks BJ, Iwama GK, Randall DJ in PHYSIOLOGICAL AND BIOCHEMICAL ZOOLOGY volume 79 JUL-AUG 2006) showed that fish exposed to low levels of ammonia were more susceptible to disease later on in life. But this mini-article is about when emergency action needs to be taken. The split between the two species (ammonia and ammonium) is determined by equilibrium. The chemistry reaction can be written as: NH3 + H+ <--> NH4+ (ammonia) + (H+ ions) <--> (ammonium+ ions) The +'s indicating a charge of +1, and <--> indicating that the reaction can go both ways. pH is a measure of the concentration of H+ ions. pH really means -log(base 10) of H+. For example, pH of 7.0 means a concentration of 10^-7 H+ ions, a pH of 5.0 means a concentration of 10^-5 H+ ions. Therefore the lower the pH, the higher the concentration of H+ ions. Now, with more H+ ions present, the above equilibrium chemical reaction gets pushed towards the right hand side. This is known as Le Chatelier's Principle. But, Le Chatelier's is a general rule, it does not give us the exact splits. The calculate the splits, we need the equilibrium constant K = [NH3][H+]/[NH4+] where [] stands for the concentration of the species in the []'s. K is a function of temperature, so experimentation needed to be performed, and some high level computations (well beyond the scope of this mini-article) needed to be performed. Clegg, S. and Whitfield, M did that experiment. (Their paper is "A chemical model of seawater including dissolved ammonia and the stoichiometric dissociation constant of ammonia in estuarine water and seawater from -2 to 40 deg C. Geochimica et Cosmochimia Acta Volume 59, 1995.) They found the equilibrium constant as a function of temperature and salinity. So with this information, I calculated what % of the total ammonia in the water would be toxic ammonia and ammonium. How to use the following tables Know your pH and temperature. Look up the % toxic ammonia on the following charts for your temp and pH Know how much ammonia you have in your tank Multiply your ammonia content by the looked up percentage If this number is over 0.02 ppm, then immediate action needs to be taken. Example: I have a tank at 27 deg with pH 6.6 water and 2.0 ppm of ammonia. % toxic ammonia (from) the chart is: 0.045% 2.0*(0.00045)=0.008 ppm toxic ammonia, so it is not immediately dangerous, though exposure to any ammonia is unhealthy for the fish. Note that if the pH of that tank was over 8.0, the level of ammonia would be immediately deadly, so pH does count! Also, these are only for freshwater, if there is enough demand I might be talked into making up the equivalent charts for saltwater tanks, but not now. 20 deg C or 68.0 deg F ============= pH ... % toxic ammonia ============= 9.0 ... 9.6835 8.8 ... 6.3363 8.6 ... 4.0937 8.4 ... 2.6225 8.2 ... 1.6709 8.0 ... 1.0608 7.8 ... 0.6719 7.6 ... 0.4250 7.4 ... 0.2686 7.2 ... 0.1696 7.0 ... 0.1071 6.8 ... 0.0676 6.6 ... 0.0427 6.4 ... 0.0269 6.2 ... 0.0170 6.0 ... 0.0107 5.0 ... 0.0011 4.0 ... 0.0001 21 deg C or 69.8 deg F ============= pH ... % toxic ammonia ============= 9.0 ... 9.7474 8.8 ... 6.3797 8.6 ... 4.1224 8.4 ... 2.6412 8.2 ... 1.6829 8.0 ... 1.0685 7.8 ... 0.6768 7.6 ... 0.4281 7.4 ... 0.2706 7.2 ... 0.1709 7.0 ... 0.1079 6.8 ... 0.0681 6.6 ... 0.0430 6.4 ... 0.0271 6.2 ... 0.0171 6.0 ... 0.0108 5.0 ... 0.0011 4.0 ... 0.0001 22 deg C or 71.6 deg F ============= pH ... % toxic ammonia ============= 9.0 ... 9.8113 8.8 ... 6.4231 8.6 ... 4.1511 8.4 ... 2.6599 8.2 ... 1.6949 8.0 ... 1.0762 7.8 ... 0.6817 7.6 ... 0.4312 7.4 ... 0.2725 7.2 ... 0.1721 7.0 ... 0.1087 6.8 ... 0.0686 6.6 ... 0.0433 6.4 ... 0.0273 6.2 ... 0.0172 6.0 ... 0.0109 5.0 ... 0.0011 4.0 ... 0.0001 23 deg C or 73.4 deg F ============= pH ... % toxic ammonia ============= 9.0 ... 9.8751 8.8 ... 6.4664 8.6 ... 4.1798 8.4 ... 2.6786 8.2 ... 1.7069 8.0 ... 1.0838 7.8 ... 0.6866 7.6 ... 0.4343 7.4 ... 0.2745 7.2 ... 0.1734 7.0 ... 0.1095 6.8 ... 0.0691 6.6 ... 0.0436 6.4 ... 0.0275 6.2 ... 0.0174 6.0 ... 0.0110 5.0 ... 0.0011 4.0 ... 0.0001 24 deg C or 75.2 deg F ============= pH ... % toxic ammonia ============= 9.0 ... 9.9388 8.8 ... 6.5097 8.6 ... 4.2085 8.4 ... 2.6973 8.2 ... 1.7190 8.0 ... 1.0915 7.8 ... 0.6915 7.6 ... 0.4374 7.4 ... 0.2764 7.2 ... 0.1746 7.0 ... 0.1102 6.8 ... 0.0696 6.6 ... 0.0439 6.4 ... 0.0277 6.2 ... 0.0175 6.0 ... 0.0110 5.0 ... 0.0011 4.0 ... 0.0001 25 deg C or 77.0 deg F ============= pH ... % toxic ammonia ============= 9.0 ... 10.0025 8.8 ... 6.5530 8.6 ... 4.2372 8.4 ... 2.7159 8.2 ... 1.7310 8.0 ... 1.0992 7.8 ... 0.6964 7.6 ... 0.4405 7.4 ... 0.2784 7.2 ... 0.1758 7.0 ... 0.1110 6.8 ... 0.0701 6.6 ... 0.0442 6.4 ... 0.0279 6.2 ... 0.0176 6.0 ... 0.0111 5.0 ... 0.0011 4.0 ... 0.0001 26 deg C or 78.8 deg F ============= pH ... % toxic ammonia ============= 9.0 ... 10.0661 8.8 ... 6.5963 8.6 ... 4.2658 8.4 ... 2.7346 8.2 ... 1.7430 8.0 ... 1.1069 7.8 ... 0.7013 7.6 ... 0.4436 7.4 ... 0.2804 7.2 ... 0.1771 7.0 ... 0.1118 6.8 ... 0.0706 6.6 ... 0.0445 6.4 ... 0.0281 6.2 ... 0.0177 6.0 ... 0.0112 5.0 ... 0.0011 4.0 ... 0.0001 27 deg C or 80.6 deg F ============= pH ... % toxic ammonia ============= 9.0 ... 10.1296 8.8 ... 6.6396 8.6 ... 4.2945 8.4 ... 2.7533 8.2 ... 1.7550 8.0 ... 1.1146 7.8 ... 0.7062 7.6 ... 0.4467 7.4 ... 0.2823 7.2 ... 0.1783 7.0 ... 0.1126 6.8 ... 0.0711 6.6 ... 0.0449 6.4 ... 0.0283 6.2 ... 0.0179 6.0 ... 0.0113 5.0 ... 0.0011 4.0 ... 0.0001 28 deg C or 82.4 deg F ============= pH ... % toxic ammonia ============= 9.0 ... 10.1931 8.8 ... 6.6828 8.6 ... 4.3232 8.4 ... 2.7720 8.2 ... 1.7671 8.0 ... 1.1223 7.8 ... 0.7110 7.6 ... 0.4498 7.4 ... 0.2843 7.2 ... 0.1796 7.0 ... 0.1134 6.8 ... 0.0716 6.6 ... 0.0452 6.4 ... 0.0285 6.2 ... 0.0180 6.0 ... 0.0113 5.0 ... 0.0011 4.0 ... 0.0001 29 deg C or 84.2 deg F ============= pH ... % toxic ammonia ============= 9.0 ... 10.2565 8.8 ... 6.7260 8.6 ... 4.3518 8.4 ... 2.7906 8.2 ... 1.7791 8.0 ... 1.1300 7.8 ... 0.7159 7.6 ... 0.4529 7.4 ... 0.2863 7.2 ... 0.1808 7.0 ... 0.1142 6.8 ... 0.0721 6.6 ... 0.0455 6.4 ... 0.0287 6.2 ... 0.0181 6.0 ... 0.0114 5.0 ... 0.0011 4.0 ... 0.0001 30 deg C or 86.0 deg F ============= pH ... % toxic ammonia ============= 9.0 ... 10.3198 8.8 ... 6.7692 8.6 ... 4.3805 8.4 ... 2.8093 8.2 ... 1.7911 8.0 ... 1.1376 7.8 ... 0.7208 7.6 ... 0.4560 7.4 ... 0.2882 7.2 ... 0.1820 7.0 ... 0.1149 6.8 ... 0.0726 6.6 ... 0.0458 6.4 ... 0.0289 6.2 ... 0.0182 6.0 ... 0.0115 5.0 ... 0.0012 4.0 ... 0.0001 31 deg C or 87.8 deg F ============= pH ... % toxic ammonia ============= 9.0 ... 10.3831 8.8 ... 6.8123 8.6 ... 4.4091 8.4 ... 2.8280 8.2 ... 1.8032 8.0 ... 1.1453 7.8 ... 0.7257 7.6 ... 0.4591 7.4 ... 0.2902 7.2 ... 0.1833 7.0 ... 0.1157 6.8 ... 0.0730 6.6 ... 0.0461 6.4 ... 0.0291 6.2 ... 0.0184 6.0 ... 0.0116 5.0 ... 0.0012 4.0 ... 0.0001 32 deg C or 89.6 deg F ============= pH ... % toxic ammonia ============= 9.0 ... 10.4463 8.8 ... 6.8554 8.6 ... 4.4378 8.4 ... 2.8467 8.2 ... 1.8152 8.0 ... 1.1530 7.8 ... 0.7306 7.6 ... 0.4622 7.4 ... 0.2922 7.2 ... 0.1845 7.0 ... 0.1165 6.8 ... 0.0735 6.6 ... 0.0464 6.4 ... 0.0293 6.2 ... 0.0185 6.0 ... 0.0117 5.0 ... 0.0012 4.0 ... 0.0001 33 deg C or 91.4 deg F ============= pH ... % toxic ammonia ============= 9.0 ... 10.5094 8.8 ... 6.8985 8.6 ... 4.4664 8.4 ... 2.8653 8.2 ... 1.8272 8.0 ... 1.1607 7.8 ... 0.7355 7.6 ... 0.4653 7.4 ... 0.2941 7.2 ... 0.1858 7.0 ... 0.1173 6.8 ... 0.0740 6.6 ... 0.0467 6.4 ... 0.0295 6.2 ... 0.0186 6.0 ... 0.0117 5.0 ... 0.0012 4.0 ... 0.0001 34 deg C or 93.2 deg F ============= pH ... % toxic ammonia ============= 9.0 ... 10.5724 8.8 ... 6.9416 8.6 ... 4.4950 8.4 ... 2.8840 8.2 ... 1.8392 8.0 ... 1.1684 7.8 ... 0.7404 7.6 ... 0.4684 7.4 ... 0.2961 7.2 ... 0.1870 7.0 ... 0.1181 6.8 ... 0.0745 6.6 ... 0.0470 6.4 ... 0.0297 6.2 ... 0.0187 6.0 ... 0.0118 5.0 ... 0.0012 4.0 ... 0.0001 35 deg C or 95.0 deg F ============= pH ... % toxic ammonia ============= 9.0 ... 10.6353 8.8 ... 6.9846 8.6 ... 4.5236 8.4 ... 2.9026 8.2 ... 1.8513 8.0 ... 1.1761 7.8 ... 0.7453 7.6 ... 0.4716 7.4 ... 0.2980 7.2 ... 0.1883 7.0 ... 0.1189 6.8 ... 0.0750 6.6 ... 0.0474 6.4 ... 0.0299 6.2 ... 0.0189 6.0 ... 0.0119 5.0 ... 0.0012 4.0 ... 0.0001 This post has been edited by Bignose: Aug 19 2006, 03:57 AM |
|
|
|
Aug 18 2006, 11:37 PM
Post
#2
|
|
![]() Fishaholic Group: Members Posts: 367 Joined: 17-November 05 From: USA Member No.: 17056 |
QUOTE(Bignose @ Aug 18 2006, 06:21 PM) [snapback]1282052[/snapback] pH is a measure of the concentration of H+ ions. pH really means -log(base 10) of H+. For example, pH of 7.0 means a concentration of 10^-7 H+ ions, a pH of 5.0 means a concentration of 10^-5 H+ ions. Therefore the lower the pH, the higher the concentration of H+ ions. This is a very interesting article. I'm not joking, I'm being sincere. This post has been edited by Bullrock74: Aug 18 2006, 11:38 PM |
|
|
|
Aug 19 2006, 03:04 AM
Post
#3
|
|
![]() a "fish hater" Group: Members Posts: 3480 Joined: 20-September 05 From: Northern BC, Canada Member No.: 15962 |
How long did it take you to write this?
But, no matter. Truly, it was a good article. -Lynden |
|
|
|
Aug 19 2006, 03:40 AM
Post
#4
|
|
![]() Just call me Dr. Honkerface Group: Members Posts: 1331 Joined: 28-June 04 From: Ames, IA Member No.: 7429 |
10 mins to write the text, 10 mins in Excel (I didn't do all that by hand), 10 mins to format the charts so that they would display correctly on the forums. I actually just expanded on the work I did for your ammonia thread the other day, so a lot of it was already done.
|
|
|
|
Aug 19 2006, 03:53 AM
Post
#5
|
|
![]() a "fish hater" Group: Members Posts: 3480 Joined: 20-September 05 From: Northern BC, Canada Member No.: 15962 |
QUOTE(Bignose @ Aug 18 2006, 08:40 PM) [snapback]1282183[/snapback] 10 mins to write the text, 10 mins in Excel (I didn't do all that by hand), 10 mins to format the charts so that they would display correctly on the forums. I actually just expanded on the work I did for your ammonia thread the other day, so a lot of it was already done. Good work. Maybe somebody will pin it. |
|
|
|
Jan 31 2007, 01:06 PM
Post
#6
|
|
|
Fishaholic Group: Members Posts: 341 Joined: 27-January 07 From: Wales Member No.: 28651 |
If anyone wants it I've converted bignose's table back into Excel and added a lookup function - enter the temp in c, the ph and nh3/4 combined reading and it gives the % and nh3 values.
PM with an email addy as I can't attach it and I'll send it. |
|
|
|
Apr 18 2008, 01:30 PM
Post
#7
|
|
|
Fish Fanatic Group: Members Posts: 70 Joined: 31-March 08 From: Trowbridge, Wiltshire Member No.: 40892 |
I can see that from your charts that if you have a high PH and a High temperature the same amount of Ammonia is more toxic to your fish if you had a low PH and a low temperature. In conclusion than people with high temps an PH should be more wary of their ammonia levels. I feel that it would be useful if something could be added to the calculator page below using your findings?
http://www.fishforums.net/aquarium-calculator.htm Darryl |
|
|
|
Apr 18 2008, 08:18 PM
Post
#8
|
|
|
Enthusiastic "Re-Beginner" Group: Members Posts: 2078 Joined: 4-January 08 From: Chapel Hill, NC, USA Member No.: 38095 |
Bignose,
I have read that 0.05 is the toxic threshold line for numbers coming out of a temp/pH calculated toxicity chart like that. You have used 0.02 and I wonder if any choice of number in this range is subjective, I guess it would be to some extent. Congrats on a nice clear explanation that covers all the details nicely! ~~waterdrop~~ |
|
|
|
![]() ![]() |
Similar Topics
| Topic | Replies | Topic Starter | Views | Last Action | |
|---|---|---|---|---|---|
![]() |
Which is more toxic, Ammonia or nitrite? | 10 | SilverDollar_03 | 226 | 23rd July 2004 - 10:25 PM Last post by: SilverDollar_03 |
![]() |
Finally 15 weeks of high Ammonia worthless babblings of a tank owner |
0 | Dectek | 139 | 18th February 2005 - 07:50 AM Last post by: Dectek |
![]() |
% Of Toxic Ammonia Charts On the Ammonia-Ammonium Equilibrium |
0 | Bignose | 0 | 31st January 2007 - 01:06 PM Last post by: Arimus |
![]() |
I Can't Get The Ammonia Out Of My Tank! | 12 | missigfunk | 163 | 25th June 2008 - 01:49 PM Last post by: missigfunk |
![]() |
Day 6 Of Tank Cycle - Ammonia 5ppm ..and Just Spotted Fry In The Tank how to deal/treat with the fry? |
7 | simonmac2 | 114 | 22nd June 2008 - 03:53 PM Last post by: simonmac2 |
|
Lo-Fi Version | Time is now: 5th September 2008 - 12:45 PM |